Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Newton Upper Falls, MA

Deck Cleaning for Composite Decking in Newton Upper Falls, MA

Low-pressure wash for composite decking. Deck washing that removes gray weathering, mildew and slippery growth from wood and composite decks without furring the boards. Typical cost $250-$600.

The secret to deck cleaning for composite decking is using the right method, not the most pressure. In Newton Upper Falls, MA, we match the cleaner and pressure to the surface so it comes out clean without damage. For composite decking, that means low-pressure wash.

The right method for the job

Low-pressure washCleaning method
Low pressure, often under 1,500 PSI with a wide fan tip, held well back; check your decking brand's care guidePressure

Cleaning solution: A composite deck cleaner recommended by the decking maker.

What to know about cleaning composite decking

Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards. Most manufacturers recommend gentle cleaning, and some limit the pressure that can be used without affecting the warranty.

Avoid: High pressure and narrow tips, which can scar the surface and may void the warranty.

How often: Every year, more often in shade.

Is it time for deck cleaning for composite decking?

  • Gray, weathered boards
  • Green or black growth and slippery spots
  • Stain that is peeling or worn through
  • Dark spots under planters and furniture
  • Mildew between composite boards

Where the grime comes from

  • Sun breaking down the wood surface (it turns gray)
  • Shade, leaves and moisture feeding mildew
  • Old stain or sealer wearing unevenly
  • Pollen and dirt trapped in the gaps

What you can do yourself

  • Clear the gaps between boards with a putty knife so water drains
  • Sweep often and keep leaves off the deck
  • Move planters and rugs now and then
  • Check for loose boards, nails and soft spots before anyone washes it

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Furry, gouged wood and lap marks from too much pressure
  • Water and grime blasted onto the house siding
  • Using chlorine bleach on wood, which can damage fibers and fasteners
  • Washing composite decking in a way that voids its warranty

How we handle deck cleaning for composite decking

  1. Inspect the boards, rails and finish
  2. Protect nearby siding and plants
  3. Apply a wood or composite cleaner and let it dwell
  4. Rinse at low pressure, following the grain
  5. Apply brightener on wood and let it dry before any stain

Typical deck cleaning for composite decking prices

$250-$600Typical range for a typical 200-400 sq ft deck
2-4 hoursTypical time on site
Once a yearRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for composite decking

Deck Cleaning for Composite Decking in Newton Upper Falls, MA

Wood decks and fences in Massachusetts gray in the summer sun and grow mildew in shade. Clean and refinish them every two to three years, on a dry, mild stretch of days.

Besides Newton Upper Falls (ZIP code 02464), we handle deck cleaning for composite decking in Newton Highlands (1.1 mi), Newton (1.7 mi), Thompsonville (1.8 mi) and Oak Hill Park (2.2 mi). Call (555) 010-0000 for a free quote in Newton Upper Falls.

Deck Cleaning for Composite Decking: frequently asked questions

How much does deck cleaning for composite decking cost in Newton Upper Falls, MA?

Deck Cleaning for Composite Decking typically costs $250-$600 for a typical 200-400 sq ft deck, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for deck cleaning for composite decking?

For composite decking: low pressure, often under 1,500 PSI with a wide fan tip, held well back; check your decking brand's care guide. What we avoid: high pressure and narrow tips, which can scar the surface and may void the warranty. The cleaning solution does most of the work, followed by a gentle rinse.

Is deck cleaning for composite decking safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule deck cleaning for composite decking?

Every year, more often in shade. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Newton Upper Falls, MA

Pressure Washing for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $150-$600

Roof Cleaning for Tile Roofs

Soft wash. Clay and concrete tile roofs grow algae, moss and lichen, especially in shade.

Typical $400-$1,000

Soft Washing for Tile Roofs

Soft wash. Clay and concrete tile roofs grow algae, moss and lichen, especially in shade.

Typical $300-$800

Pool Deck Cleaning

Pool deck cleaning that removes slippery algae, sunscreen residue and stains without damaging coatings or stone.

Typical $200-$500

Rust Stain Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $150-$500

Patio Cleaning for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$400

Pressure Washing

High-pressure cleaning for driveways, walkways, patios, pool decks and other hard surfaces, with the pressure matched to each surface.

Typical $150-$600

Graffiti Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $200-$800

Paver Cleaning & Sealing for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $600-$1,800

Pressure Washing for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $150-$600

Exterior Mold & Mildew Removal for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $250-$700

Pool Deck Cleaning for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $200-$500

Ready for a cleaner home or business?

Get a free pressure washing quote in Newton Upper Falls, MA. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote